Learn to Fly 3D by Michael Wargo

Learn How to Fly 3D by Michael Wargo

In the following 4 videos, Michael Wargo, 3D RC pilot currently for Precision Aerobatics, explains basic aerobatic flying, 3D flying, characteristics of a 3D airplane, throttle management in 3D flying, how to perform basic 3D maneuvers, and more.

Learn to Fly 3D: 1. Intro to Aerobatics
In this video Michael Wargo explains the dynamics of basic aerobatics with an RC airplane and how to perform them and transition into more complicated 3D maneuvers.

Learn to Fly 3D: 2. Basic 3D Maneuvers
In this video Michael Wargo explains the basics of 3D flight and the characteristics required in an RC airplane to achieve 3D maneuvers.

Learn to Fly 3D: 3. Throttle Management, Roll, Harriers
In this video Michael Wargo explains throttle control and throttle management to achieve rolls, harriers and rolling harriers.

Learn to Fly 3D: 4. Knife Edge, Hover, Routine
In this video Michael Wargo shows how to fly in knife edge flight, how to hover, and putting it all together in a simple 3D routine.

Comment below on the “Learn to Fly 3D by Michael Wargo” videos.


Other 3D Videos by Michael Wargo on TazRC


Return to: RC How-to Videos

Leave a Reply

Registration not required